sub_logo.gif - 3022 Bytes
sub_training_title.gif - 2406 Bytes
sub_top_contact.gif - 2317 Bytessub_top_search.gif - 984 Bytessub_top_map.gif - 1061 Bytessub_top_home.gif - 771 Bytes
sub_nav_left.gif - 167 Bytes
Training Courses and Technical Support sub_about_collage.gif - 9824 Bytes
collage_fade.gif - 338 Bytes collage_bg.gif - 45 Bytes

Two-day training courses are offered on a regular basis at various sites around the world. The cost is $500-700/person (depending on location). We also provide on site training courses for our clients for $1,400-1,950/day (depending on location) plus the travel expenses of the trainer. Technical support is provided at no extra charge via telephone, fax, or e-mail. Our experts answer 95% of hotline questions within 24 hours. And if your resources are stretched and need extensive help for a specific project, our applications engineers will be happy to do it for you on a consulting basis.

A typical agenda for a two-day course follows below. Pictures from past courses also follow. The training courses are hands-on and highly interactive. All participants have the opportunity to practice on the computer the various topics that are covered during the course.

As you may notice from the training schedule that follows, many of our courses are hosted by Universities around the world. Hosting Universities receive a free academic site license of SuperPro Designer and can send a small number of faculty members and graduate students to attend the course free of charge. If you are interested in hosting such a course, please send email to Dr. Demetri Petrides. In general, we prefer Universities that are close to major cities and/or industrial hubs with easy transportation and availability of lodging amenities. The courses can be scheduled during school breaks to avoid conflicts with regular course work. The minimum requirement for hosting a course is the availability of a computer lab where SuperPro Designer can be installed and utilized during the course.

Training Schedule for 2020

Dates Status Country Location
January 30-31,
Los Angeles, CA

Keck Graduate Institute (KGI)
Amgen Bioprocessing Center
535 Watson Drive - Room 152
Claremont, CA 91711
March 19-20,
New Jersey

Rutgers University
Chemical & Biochemical Engineering
98 Brett Rd
Piscataway, NJ 08854-8058
Mid April,
Rio de Janeiro

Federal University of Rio de Janeiro (UFRJ)
Dept. of Bio / Chemical Engineering
Av. Athos da Silveira Ramos, 149
Ilha do Fundao,
Rio de Janeiro, RJ 21949-900, Brazil
Mid May,
Raleigh, NC

North Carolina State University
Biomanufacturing Training & Education Center (BTEC)
850 Oval Drive
Raleigh, NC 27606
June 8-9,

Universitat Politecnica de Catalunya
Dpt. Enginyeria Quimica, ETSEIB
Avda. Diagoal 647, Pab. G-2
E-08028 Barcelona,  Spain
End of June,

Universitat Tufts University
Dept. of Chemical Engineering
4 Colby Street
Medford, MA 02155
End of October,

TU Delft
Department of Biotechnology
Van der Maasweg 9, Bldg. B58
2629 HZ Delft, The Netherlands

Additional courses may be offered in other parts of the world.

Typical Agenda of a Two-Day Course

For public courses, we start from zero assuming that the attendees have no previous experience with SuperPro. On-site courses tend to be more customized to the needs of the hosting company.

  9:00 - 9:45 AM Interface fundamentals
FIRST 9:45 - 10:30 AM Flowsheet development and initialization
Morning Session 10:30 - 10:45 AM Coffee Break
  10:45 - 12:00 Noon Material Balances & Equipment Sizing
  12:00 - 1:00 PM Lunch Break
  1:00 - 2:00 PM Process Scheduling & Resource Tracking
FIRST 2:00 - 3:00 PM Project Economic Evaluation
Afternoon Session 3:00 - 3:30 PM Coffee Break
  3:30 - 5:00 PM Overview of Unit Operation Models
  9:00 - 10:30 AM  Throughput analysis and Debottlenecking
SECOND 10:30 - 11:00 AM Coffee Break
Morning Session 11:00 - 12:00 Noon Water Purification
  12:00 - 1:00 PM Lunch Break
SECOND 1:00 - 2:00 PM Wastewater Treatment & Air Pollution Control
Afternoon Session 2:00 - 2:30 PM VOC Emission Calculations and Reporting
  2:30 - 3:00 PM Audience-specific topics
  3:00 - 3:30 PM Coffee Break
  3:30 - 5:00 PM Q&A - Future Outlook

Registering for a Course

Click here to download the registration form (in MS Word format). Please fill it in and email it to registration(at) or fax it to (908) 654-3866. If you prefer the form in pdf format, please click here.

Course Instructors

The majority of the courses are offered by Mr. Demetri Petrides (shown below), the President of Intelligen, Inc. Mr. Petrides holds a PhD in Chemical Engineering from MIT and has extensive experience in modeling and optimizing biochemical, pharmaceutical, specialty chemical, and end-of-pipe treatment processes.

dp-picture.jpg - 129335 Bytes

Courses in parts of Europe and in South East Asia are handled by Mr. Alexandros (Alex) Koulouris (shown below), the Managing Director of Intelligen Europe. Mr. Koulouris holds a PhD in Chemical Engineering from MIT and is an expert in Process Modeling and Automation.

Alekos.jpg - 268685 Bytes

Mr. Charles Siletti is in charge of courses in the Pacific Rim and in parts of North America. Mr. Siletti holds a PhD in Chemical Engineering from MIT and is the Director of Planning and Scheduling Applications at Intelligen, Inc. He has extensive experience in process modeling and optimization. Dr. Siletti is also an expert in Scheduling and Debottlenecking of multi-product manufacturing facilities.

Pictures from Past Training Courses

The following picture is from a course (open to the public) that was offered at the Saarland University in Saarbruecken, Germany on May 13th and 14th, 2002. The course was attended by scientists and engineers from biotech, pharmaceutical, chemical, and environmental companies from various European countries (e.g., Denmark, Germany, Italy, Sweden, and Switzerland). We also had two graduate students from Germany, a professor from Denmark, and a professor from Portugal.

Germany-2002.jpg - 267937 Bytes

The following picture is from a two-day course that was offered at Novo Nordisk, Denmark, on December 6th and 7th, 2001. The course was attended by 17 chemical engineers working for Novo Nordisk Engineering and Novo Nordisk Pharma (the R&D and manufacturing divisions). The course focused on batch process simulation with emphasis on production of biological and synthetic pharmaceutical products. Considerable time was spent on issues of throughput analysis and debottlenecking related to main as well as auxiliary (e.g., CIP and SIP skids) equipment.

Novo-2001b.jpg - 27552 Bytes